Rectangle
Square
Round
Ci130.2QS
Intended to be as unobtrusive as possible, the Ci Series Ci130.2QS and Ci130.2QR are high-fidelity flush-mount loudspeakers utilising KEF’s Uni-Q® driver array technology. This gives the round and square bezel speakers the inherent smooth dispersion characteristics to fill any normal room with an expansive, generous and rich sound stage.
The Ci Series Ci130.2QS and Ci130.2QR is best suited where high quality music and speech reinforcement applications require hi-fi performance such as: | |
| Model | Ci130.2QS |
| Nominal Impedance | 8Ω |
| Sensitivity (2.83V @ 1m) | 86dB |
| Frequency Response +/-6dB 2pi/open-backed | 50 - 40kHz |
| Frequency Response +/-6dB With back can/rear enclosure | - |
| Crossover Frequency | 2.8kHz |
| Drive Units (LF / MF / HF) | 130mm / - / 19mm |
| Recommended Amplifier Power | 10-50W |
| Features | Uni-Q Array |
| Product External Dimensions (Height / Width / Depth) | 180mm (7.09in.) / 180mm (7.09in.) / 96mm (3.78in.) |
| Cut-out Dimension (Height / Width) | 158mm (6.22in.) / 158mm (6.22in.) |
| Mounting Depth from Surface (Product only / With back can) | 90mm (3.54in.) / - |
| Installations | ![]() |
| Parameters | These paramaters are for the LF unit in free air: |
| SD | (Piston area) 93.31cm2 |
| Re | (DC resistance) 5.85 Ohms |
| BI | (Transduction coefficient) 5.61Tm (Flux density x length of immersed wire) |
| Fs | (Free air resonsance frequency) 64.71Hz |
| Mms | (Moving mass including air load) 9.24g |
| Mmd | (Moving mass excluding air load) 8.70g |
| Cms | (Compliance) 0.655mm/N |
| Vas | (Equivialent air voume of compliance) 7.71 |
| Qms | mechanical Q 15.23 |
| Qes | electrial Q 0.70 |
| Qts | total Q 0.67 |